Before you install Intel Packet Protect on your system, make sure the system meets the following requirements. Intel Packet Protect systems can be servers or workstations.
Before installing Intel Packet Protect, make sure your systems meet these requirements:
Note: See Set Up Intel Adapters for information on choosing an Intel adapter.
All installations are subject to the end user's acceptance of the applicable Intel Software License Agreement.
You will need the information detailed in the following table during Intel Packet Protect installation at each computer. To complete the installation most efficiently, gather the information listed in the table before you begin.
|
Information You Need |
Description |
|---|---|
|
Default behavior |
Decide how you want the system to communicate with other systems on the network:
|
|
Pre-shared key
|
Enter a pre-shared key the system will use to communicate securely with other IPSec systems. A pre-shared key is similar to a secret password. |
Copyright © 2000, Intel Corporation. All rights reserved.
Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein.
* Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.