These drivers are provided for convenience. They have been tested

with SCO OpenServer* version 5.0.5.  For any and all UNIX support

questions as well as updated drivers, please contact the OS vendor.





Instructions for Installing the eeE Driver for SCO OpenServer

=============================================================

     

1. Copy the eee.vol file to any directory, say /tmp, 

   on the SCO system, renaming the file as VOL.000.000. Also, make

   the file read-only by using 'chmod'.



	For example,

		# cp eee.vol /tmp/VOL.000.000

		# chmod 444 /tmp/VOL.000.000

     

2. If there is an older version of the eeE driver on the system, you 

   must first remove it. To do this, run 'netconfig'. Remove all 

   instances of the "Intel ..." adapters. Exit netconfig 

   without opting to relink the kernel. 

     

3. Install the new driver using 'custom'. When asked for the 

   installation media, choose 'media images', and type the directory 

   path to the VOL.000.000 file. (In step 1, if you copied it to 

   /tmp, type '/tmp'). After the installation of the driver is 

   complete, exit 'custom'.

     

4. Run 'netconfig' and add the adapters. For each adapter that is 

   present in the system, enter the appropriate TCP/IP parameters. 

   By default, the driver automatically detects the line speed and 

   duplex mode. If you want to force any of these settings, choose 

   'Advanced Options' and set the speed and duplex modes. Exit 

   'netconfig' and choose to relink the kernel.

     

5. Reboot the system.









* Third-party trademarks are the property of their respective owners.