These drivers are provided for convenience.  They have been tested with

UnixWare* version 7.1.0 and later.  For any and all UNIX support questions

as well as updated drivers, please contact the OS vendor.





Installing the eeE8 Driver for UnixWare 7 

=========================================



To install the eeE8 driver for UnixWare 7:

     

1. Copy the eeE8.pkg file into any directory on the 

   UnixWare system, such as in the /tmp directory.

     

2. Make sure no other users are logged on and all user applications

   are closed.

     

3. If there is an older version of the eeE driver on the system, first

   run 'netcfg' and remove any configured NICs. Exit 'netcfg'. Remove

   the old driver by typing 'pkgrm eeE'. (You can find the driver version

   by typing 'pkginfo -l eeE'.)

   

4. Install the new driver using 'pkgadd'. For example:

     

        # pkgadd -d /tmp/eeE8.pkg

     

5. Run 'netcfg' to add and configure the NICs. 



6. Reboot the system.

     

NOTE:  If you require Hot Plug PCI capabilities, the DDI 8 eeE8 driver must 

be used.  The DDI 8 driver is supported on UnixWare 7.1.0 and later 

versions.  For more information about Hot Plug PCI capabilities please 

refer to SCO UnixWare 7 documentation.



* Third-party trademarks are the property of their respective owners.