Jumper Settings for 6MFX
CPU Speed Selection
| Internal CPU Speed MHz |
External Bus Speed MHz |
JP6 | JP7 | JP8 | JP9 | Frequency Ratio |
JP14 | JP15 | JP16 | JP17 |
|---|---|---|---|---|---|---|---|---|---|---|
| 233 | 66 | CL | OP | CL | OP | 3.5x | OP | OP | CL | CL |
| 266 | 66 | CL | OP | CL | OP | 4x | CL | CL | OP | CL |
| 300 | 66 | CL | OP | CL | OP | 4.5x | OP | CL | OP | CL |
OP=OPEN, CL=CLOSE
The following jumpers are for internal use. Normally you do not need to change these settings.
JP18 = OPEN, JP19 and JP20 = 1-2
Copyright(c) 1997 Zida Technologies Limited. All Rights Reserved.
Last Updated on 3 Oct 97 HKT 15:30
Legal Notice