************************************************************ * * Alpha, Beta Release * Graphics Driver for Intelr 810/810E/815/815E/815EM Chipsets * Microsoft Windows* 95 (all versions) * Microsoft Windows* 98 * Microsoft Windows* 98 Second Edition * Microsoft Windows* Millennium * Driver Revision: 4.13.01.2839 * Package: 8907 * * 6.4 Beta Candidate 14.0 * * * July 5, 2001 * * NOTE: This document refers to systems containing the * following Intel products: * * Intel(R) 810 Chipset * Intel(R) 810E Chipset * Intel(R) 815 Chipset * Intel(R) 815E Chipset * Intel(R) 815EM Chipset * * * Installation Information * * This document makes references to products developed by * Intel. There are some restrictions on how these products * may be used and what information may be disclosed to * others. Please read the Disclaimer section and contact * your Intel field representative if you would like more * information. * ************************************************************ ************************************************************ * DISCLAIMER: Intel is making no claims of usability, * efficacy or warranty. The INTEL SOFTWARE LICENSE AGREEMENT * contained herein completely defines the license and use of * this software. ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. System Requirements 2. Localized Language Abbreviations 3. Installing the Software 4. Verifying Installation of the Software 5. Identifying the Software Version Number 6. Uninstalling the Software 7. Installation Switches Available ************************************************************ * 1. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain one of the following Intel Chipsets: Intel(R) 810 chipset Intel(R) 810E chipset Intel(R) 810E2 chipset Intel(R) 815 chipset Intel(R) 815E chipset Intel(R) 815EM chipset 2. The software should be installed on systems with at least 64 MB of system memory. 3. There should be sufficient hard disk space in the directory (typically C:\WINDOWS\TEMP or C:\TEMP) on the system in order to install this software. The drivers included with this distribution package are designed to function with all released versions of Microsoft Windows 95, Microsoft Windows 98, and Microsoft Windows Millennium Edition. 4. Windows* 95 must have DCOM95 installed prior to installing these drivers. This is not necessary for later versions of Windows. DCOM95 is available from Microsoft at the following location: http://www.microsoft.com/com/dcom/dcom95/dcom1_3.asp Please check with your system provider to determine the operating system and Intel Chipset used in your system. ************************************************************ * 2. LOCALIZED LANGUAGE ABBREVIATIONS ************************************************************ The following list is the abbreviations of all languages that the driver has been localized in. You may have to reference this section while using this document. chs -> Mainland Chinese cht -> Traditional Chinese dan -> Danish deu -> German eng -> International English enu -> English esp -> Spanish fin -> Finnish fra -> French frc -> French Canadian ita -> Italian jpn -> Japanese kor -> Korean nld -> Dutch nor -> Norwegian plk -> Polish ptb -> Brazilian Portuguese ptg -> Portuguese rus -> Russian sve -> Swedish tha -> Thai ************************************************************ * 3. INSTALLING THE SOFTWARE ************************************************************ General Installation Notes: 1. The operating system must be installed prior to the installation of the driver. 2. This installation procedure is specific only to the version of driver and installation file included in this release. 3. If a previous version of an Intel(R) Graphics Driver is installed, remove it before proceeding with the installation procedure. Please refer to Section 6, UNINSTALLING THE SOFTWARE for removal instructions. 4. You can choose four different methods of installation for this release. The files that must be downloaded for each are indicated in the appropriate section. 1) InstallShield* (automated) install from CD-ROM See Section 3.1. 2) InstallShield* (automated) install from web download See Section 3.1. 3) Manual install from hard drive See Section 3.2. 4) Manual install from CD-ROM see Section 3.2. 3.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or WEB DOWNLOAD 1. To install from a CD, insert the CD-ROM. If autorun is enabled, the installer will begin automatically. Otherwise, enter the "Graphics" directory on the CD-ROM and double-click "SETUP.EXE". Continue on to step 3. 2. To install from a Web download, you will download either a ZIP file or an EXE file from the Web. a. If it is an EXE file, double-click the file you downloaded and the installation will begin automatically. Continue on to step 3. b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or PKZip*, then enter the directory into which you unzipped the files. Enter the "Graphics" subdirectory and double-click "SETUP.EXE". Continue on to step 3. 3. Click "Next" on the Welcome screen. 4. Read the license agreement and click "Yes" to continue. 5. The driver files will now be installed. When the install finishes, choose the "Yes" to reboot option, and click "Finish" to restart your computer. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. 3.2 MANUAL INSTALL FROM CD-ROM OR HARD DRIVE 1. Download "WIN9X.ZIP" from the Web. You must unzip it using a utility such as WinZip* or PKZip*. Transfer the files to a CD if you wish to install from the CD-ROM. 2. Select the "My Computer" icon, the "Control Panel" icon, and then the "Display" icon. 3. You should now be in the "Display Properties" window. Select the "Settings" tab, and click on the "Advanced" button. 4. In the "Advanced Display Properties" window, select the "Adapter" tab, and click the "Change..." button. 5. The "Update Device Driver Wizard" window appears. Click on the "Next" button to continue. 6. A new window appears, prompting either for Windows to search for a device driver or for manual selection. Click the following option: "Display a list of all the drivers in a specific location, so you can select the driver you want." After this, click on the "Next" button. 7. From the new window, click on the "Have Disk" button and then the "Browse" button. 8. Enter the directory where you unzipped WIN9X.ZIP and then enter the "Graphics" subdirectory. Next enter the "Win9X" subdirectory. At this point, the "I81XW9X.INF" file should be highlighted. Click "OK". 9. Click "OK". The "Select Device" screen should open and it may it may have several options to choose from. If a warning appears saying that the driver chosen was not written specifically for the selected hardware, click "Yes". Select the display adapter that your system contains. Click "OK". 10. Click "Next". The driver should install. If you are installing an older version of the driver after having previously installed a newer version, several "Version Conflict" windows may appear asking if you want to keep the newer driver files. If you do want to continue installing the older drivers, click "No" on each of these screens. Click "Finish" when done. 11. Close all open windows and click "Yes" to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. ************************************************************ * 4. VERIFYING INSTALLATION OF THE SOFTWARE ************************************************************ 1. From the desktop, click on "My Computer", then "Control Panel", and finally, "System". 2. You should be in the "System Properties" window. Click on the "Device Manager" tab. From here, go down to "Display Adapter" and click. The Intel(R) Graphics Driver should be listed. If not, the driver is not installed correctly. To check the version of the driver, refer to the section below. ************************************************************ * 5. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 1. Select the "My Computer" icon, the "Control Panel" icon, and then the "Display" icon. 2. You should now be in the "Display Properties" window. Select the "Settings" tab and click the "Advanced" button. 3. Select the "Intel(R) Graphics Technology" tab. The graphics driver version should be listed on this screen. ************************************************************ * 6. UNINSTALLING THE SOFTWARE ************************************************************ NOTE: This procedure assumes the above installation process was successful. This uninstallation procedure is specific only to the version of the driver and installation files included in this package. 1. From the desktop, click on "My Computer", "Control Panel", and then "Display". 2. You should be in the "Display Properties" window. Click on the "Settings" tab. Next, click the "Advanced" button. 3. Select the "Adapter" tab. The driver information will appear. Click on the "Change" button. 4. The "Update Device Driver Wizard" window should open. For Windows* Me only, select the "Specify the location of the driver (Advanced)" option. Click "Next". 5. In the next window, select the "Display a list..." option and click the "Next" button. Next, click on "Show all hardware". 6. In the split screen window under "Manufacturers:", select "(Standard display types)". In the other half of the split window, select "Standard PCI Graphics Adapter (VGA)", then click on the "Next" button. Click the "Next" button again. 7. Click on "Finish," then close all open windows. When asked to restart, click on "Yes." 8. To verify that the VGA driver was installed correctly, refer to Section 4 and look for "Standard PCI Graphics Adapter (VGA)," instead of the Intel(R) Graphics Driver. ************************************************************ * 7. INSTALLATION SWITCHES AVAILABLE ************************************************************ The switches in the SETUP.EXE file will have the following syntax. Switches are not case sensitive and may be specified in any order (except for the -s switch). Switches must be separated by spaces. SETUP [-b] [-g{xx[x]}] [ [ -nocuidlg{xxxx}, [-nocuidlg{xxxx}]...] | -nodiag | -basic] [-overwrite] [-nolic] [-bits x x_pixels x y_pixels x vert_refresh] [-l{lang_value}] [-s] [-f2] GFX-INSTALL CUSTOMER SWITCHES -b Forces a system reboot after the installation completes. In non-silent mode, the absence of this switch will prompt the user to reboot. In silent mode, the absence of this switch forces the Setup.exe to complete without rebooting (the user must manually reboot to conclude the installation process). -g{xx[x]} Forces the configuration of a specific language version of the driver during the install. The absence of this switch will cause the installation to utilize the language of the OS locale as its default. -overwrite Installs the graphics driver regardless of the version of previously installed driver. In non-silent mode, the absence of this switch will prompt the user to confirm overwrite of a newer Intel Graphics driver. In silent mode, the absence of this switch means that the installation will abort any attempts to regress the revision of the Intel Graphics driver. -nolic Suppresses the display of the license agreement screen. In non-silent mode, the absence of this switch will only prompt the user to view and accept the license agreement. The functionality of this switch is automatically included during silent installations. -bits x x_pixels x y_pixels x vert_refresh Sets the four default display parameters: bits per pixel, pixels per line, pixels per column and vertical refresh rate INSTALLSHIELD(TM) STANDARD SWITCHES -l{lang_value} The switch provided by InstallShieldTM specifies the language used for the Gfx-Install user interface. The absence of this switch will cause the installation to utilize the language of the OS as its default. Detailed requirements for the Install Dialog language settings are given in the Install Dialog Language section. -s Run in silent mode. The absence of this switch causes the install to be performed in verbose mode. -f2 Specifies an alternate location and name of the log file created by a silent install. By default, Setup.log log file is created and stored during a silent install in the same directory as that of Setup.ins. ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT * (OEM/IHV/ISV Distribution & Single User) ************************************************************ IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. The Software contains pre-release "alpha" or "beta" code, which may not be fully functional and which Intel Corporation ("Intel") may substantially modify in producing any "final" version of the Software. Intel can provide no assurance that it will ever produce or make generally available a "final" version of this Software. LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. You may copy the Software onto your organization's computers for your organization's use, and you may make a reasonable number of back-up copies of the Software, subject to these conditions: 1. You may not copy, modify, rent, sell, distribute or transfer any part of the Software, except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 2. You may not reverse engineer, decompile or disassemble the Software. 3. You may not sublicense the Software. 4. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, an enclosed "license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of (90) ninety days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software, as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements, unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMISV1/RBK/January 21, 2000 ************************************************************ ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ * Third-party brands and names are the property of their respective owners. Copyright (c) Intel Corporation, 1998-2001