This file will help you to determine which motherboard your system has. You MUST determine this before attempting to upgrade your Flash BIOS. It has also been updated to provide additional details regarding the motherboards. We do not recommend upgrading your BIOS without reason. If you desire a feature that a later BIOS has or if you are having problems that a later version of BIOS may correct we suggest that you upgrade your BIOS. There is however, no reason to do so if your computer is operating properly. Note that an interupted or improperly performed BIOS upgrade can render your computer inoperable. If you have any questions or concerns about the upgrade process at all we recommend that you call Zeos Technical Support at (800) 228-5390 and go through the process with a technician on the phne with you. When you are asked for the BIOS part number, you are being asked for the number that looks like XXX-XXXX-XX, not the Phoenix or Quadtel version number. Computer manufacturers purchase the core BIOS code and modify it to suit their hardware. Because of this, the Phoenix and Quadtel numbers do not have any significant meaning, the later modifications were made by Zeos, not by Phoenix or Quadtel. BIOS tables have not been modified by Zeos to accomidate larger hard drive capacities. Upgrading your BIOS will not allow you to use larger hard disk drives. *** 486 Systems *** The Goose Board P/N 010-0030-XX --------- Processors Speeds 486Sx/Dx/Dx2 25/33/50/66 During boot, the system should show "Phoenix A486 BIOS 1.01", with a line below it which shows "Release 1.0xy", where x is currently 4, 5, or 6 and y is either blank or "S". The 4, 5, and 6 indicate the revision of the BIOS, and the "S" indicates if the SCSI chip option is installed. The footprint of the motherboard is fairly large, and has a large unused quadrant in the right-front corner. When the SCSI chip is added or removed, the Flash BIOS must be updated. Revision 1.04 - Initial release. Revision 1.05 - Fixes "floppy drive failure" messages with Sound Blaster or Sound Blaster Pro installed. Revision 1.06 - Added "VL Bus Mastering" Enable/Disable to CMOS for bus master controllers like the Ultrastor 34F VLB SCSI controller. Note SCSI counterparts have identical revision history. The files to update the Goose BIOS are located on the Zeos BBS in the Motherboards file area, subarea VL_Upgradable. The files are goosXXX.exe and goosXXXs.exe, where the "XXX" is the revision number,and the "s" is the SCSI version of that revision BIOS. On the Internet, you can download the latest BIOS at the following URL: NON-SCSI: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/vl_upgradable/goos106.exe SCSI: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/vl_upgradable/goos106S.exe Replacement Battery: CR2380 or Ray-o-Vac 4.5v type 844 Memory: 4 banks, each consisting of one 36-bit SIMM socket. 256Kx36 (1 MB), 1024Kx36 (4 MB) and 4096Kx36 (16 MB) SIMMs may be used, as well as 2MB and 8 MB (double-sided) modules. Due to limitations of the memory controller, only two double-sided modules may be installed, one in Bank 0 or 1, and the other in Bank 2 or 3. If one double-sided SIMM is installed, the other socket of the pair must be empty. Four single-sided modules may be used. Cache: Optional 128 KB or 256 KB secondary RAM cache. This is a direct-mapped write-through cache. Proprietary module BIOS tables have not been modified by Zeos to accomidate larger hard drive capacities. Upgrading your BIOS will not allow you to use larger hard disk drives. The Gosling Board P/N 010-0032-XX ----------- Processors Speeds 486Sx/Dx/Dx2 25/33/50/66 During boot, the system should show "Phoenix A486 BIOS 1.01", with a line below it which shows "452001x-0y", where the x is 6 or 7, and y is 1 or 2. The 7 signifies that the SCSI chip option is installed, and 6 it is not. The 1 and 2 indicate the revision of the BIOS. When the Adaptec 6260 SCSI chip is added or removed, the Flash BIOS must be updated. Revision 4520016-01 - Initial release. Revision 4520016-02 - Changed serial port auto-detection routines to avoid COM4 conflict with S3-based video cards (Diamond Stealth cards) Note SCSI counterparts have identical revision history. The files to update the Gosling BIOS are located on the Zeos BBS in the Motherboards file area, subarea VL_Upgradable. The files are gosl-XX.exe and gosl-XXs.exe, where the "XX" is the revision number, and the "s" is the SCSI version of that revision BIOS. On the Internet, you can download the latest BIOS at the following URL: NON-SCSI: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/vl_upgradable/goos106.exe SCSI: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/vl_upgradable/goos106s.exe Replacement Battery: CR2380 or Ray-o-Vac 4.5v type 844 Memory: 4 banks, each consisting of one 36-bit SIMM socket. 256Kx36 (1 MB), 1024Kx36 (4 MB) and 4096Kx36 (16 MB) SIMMs may be used, as well as 2 MB dnd 8 MB (double-sided) modules. Due to limitations of the memory controller, only two double-sided modules may be installed, one in Bank 0 or 1, and the other in Bank 2 or 3. If one double-sided SIMM is installed, the other socket of the pair must be empty. Four single-sided modules may be used. The "DRAM Speed" option in the CMOS Setup must be set to match the speed of the slowest memory installed. No jumpers or switches need be set for the memory configuration. Cache: Optional 128 KB or 256 KB secondary RAM cache. This is a direct-mapped write-through cache with 16 byte line size. Proprietary module. BIOS tables have not been modified by Zeos to accomidate larger hard drive capacities. Upgrading your BIOS will not allow you to use larger hard disk drives. The Duck (Zeos / DEC and Occidental) Board P/N 010-0023-XX ------------------------------------ Processors Speeds 486Sx/Dx/Dx2 25/33/50/66 During boot, the system should show "PheonixBIOS(TM) A486 version 1.06x" if the company logo below this line is "Zeos International, Ltd." or "PheonixBIOS(TM) A486 Version 1.0x" if the company logo below this line is "Occidental Systems". The "x" will be the evision number of the BIOS. This motherboard can also be identified by the fact that it has the video card built on to the motherboard, with a flat grey ribbon cable connecting the 15 pin video port to the motherboard at J8 which is located on the edge of the motherboard next to the hard drive cable (J7). This is currently our only VESA Local Bus system to use 9 bit SIMM's. This means that it has 8 SIMM slots instead of 4. Revision 1.05(d) - Initial release. Revision 1.06(d) - Service release #1. To this date, all changes made in the Zeos / DEC version of the BIOS have had identical changes made in the Occidental BIOS. BIOS should not be mixed between the two types of systems (Zeos / DEC vs Occidental) as it may not function correctly afterwards. The files to update the Zeos / DEC Duck motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea L_Upgradable. The files are decXXX.exe, where the "XXX" is the revision number. The files to update the Occidental Duck motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea L_Upgradable. The files are oxyXXX.exe, where the "XXX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/vl_upgradable/dec106.exe Replacement Battery: CR2380 or Ray-o-Vac 4.5v type 844 Memory: Two banks, each consisting of four 9-bit SIMM sockets. 256Kx9, 1024Kx9 and 4096Kx9 SIMMs may be used. The "DRAM Speed" option in the CMOS Setup must be set to match the speed of the memory installed. No jumpers or switches need be set for the memory configuration. DRAM combinations known to work are: 1MB, 4MB, 8MB, 16MB, 32MB, and 64MB. Cache: Optional 128 KB or 256 KB secondary RAM cache. This is a direct-mapped write-through cache with 16 byte line size. Proprietary module. BIOS tables have not been modified by Zeos to accomidate larger hard drive capacities. Upgrading your BIOS will not allow you to use larger hard disk drives. The Martin Board P/N 010-0035-XX ---------- Processors Speeds 486Sx/Dx/Dx2 25/33/50/66 During boot, the system should show "PheonixBIOS 82C480 82C113 486 BIOS version Q3.07.01" and further down on the screen will appear a number like "452-0018-xx" for non-SCSI and "452-0019-xx" for SCSI where "xx" is the revision number of the Flash BIOS. When the Adaptec 6360 SCSI chip is added or removed, the Flash BIOS must be updated. There were some important features added to various revisions of the BIOS They are detailed as follows: Non-SCSI Revision 452-0018-11 - Allows use of non-parity SIMMs, removes VL-Bus Master setting in CMOS. Revision 452-0018-12 - Adds "Green" power saving features. SCSI Revision 452-0019-11 - Allows use of non-parity SIMMs, removes VL-Bus Master setting in CMOS. Revision 452-0019-12 - Adds "Green" power saving features. The files to update the Martin BIOS are located on the Zeos BBS in the Motherboards file area, subarea VL_Upgradable. The files are mart-XX.exe, martXXs.exe, and martXXb.exe, where the "XX" is the revision number, the "s" is the SCSI version of that revision BIOS,and the "b" contains both the SCSI and Non-SCSI revision of that BIOS. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/vl_upgradable/mart-12b.exe Replacement battery: Ray-o-Vac 4.5v type 844 Memory Memory Type 1, 2, 4, 16MB X36 SIMMS Ver 11+ of BIOS allow 32 bit SIMMS Memory Speed 50ns, 60ns, 70ns Configurations 2, 4, 8, 10,12, 16, 32, 64MB Min. Capacity 2MB Max. Capacity 64MB System Cache The Base system cache is 0K. The cache is upgradable to 128k and 256K of cache via socked dip style memory. The cache controller is integrated into the system chipset. Mapping Direct-mapped Write Policy Write-back Configurations 64KB, 128KB, 256KB Standard Capacity 0KB Min. Capacity 0KB Max Capacity 256KB Cache memory type 32Kx8 DIPS Cache memory Speed 15ns/20ns Cache memory Mfg./Part No. Micron MT5C2568 To minimize the cache related problems with the current version of the Martin motherboard, please adhere to the following guidelines until further notice: 128K of Cache = One Micron-15 SRAM chip in U17 Four Toshiba-20 SRAM chips in U29, 30, 31, and 32 256K of Cache = One Micron-15 SRAM chip in U17 Eight Toshiba-20 SRAM chips in U29, 30, 31, 32, 33, 34, 35, and 36 NOTE: If either of the above cache systems contains more than 32MB of DRAM (SIMMS) you MUST use two "TAG" chips. (Micron -15's in both U17 and U19) otherwise only one "TAG" chip is required. BIOS tables have not been modified by Zeos to accomidate larger hard drive capacities. Upgrading your BIOS will not allow you to use larger hard disk drives. Rattler 486 Board P/N 010-0043-XX ----------- Processors Speeds 486Sx/Dx/Dx2 25/33/50/66 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0027-xx Minneapolis, Minnesota, USA CPU= 486pp ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the "Pantera 453-0027-xx" line, where the "xx" is in the example. The processor speed and type will be shown on the "CPU= 486pp ssMhz" line where the "ss" is the speed and the "pp" is the type (as in SX, DX, DX2, or DX4). The SCSI BIOS is always installed, whether the SCSI chip is on the motherboard or not. If the chip is not on the motherboard, then the SCSI option should be disabled in CMOS. The Rattler uses an Adaptec 6360 SCSI chip. The files to update the 486 Rattler motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_486. The files are 486-XX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pantera_486/486-07.exe Replacement battery: Dallas Chip MEMORY DESCRIPTION Memory Type 2-Mbyte, 4-Mbyte, 8-Mbyte and 16-Mbyte 32 or 36 bit single/double sided SIMMs, installed in pairs. Configuration 4, 8, 12, 16, 24, 32, 64, 96 and 128Mbyte CACHE DESCRIPTION External Cache Direct-map, write-back; 0-Kbytes standard, upgradable to 128-Kbyte and 256-Kbyte. 32 bit data path. Python 486 Board P/N 010-0047-XX ----------- Processors Speeds 486Sx/Dx/Dx2 25/33/50/66 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0029-xx Minneapolis, Minnesota, USA CPU= 486pp ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the "Pantera 453-0027-xx" line, where the "xx" is in the example. The processor speed and type will be shown on the "CPU= 486pp ssMhz" line where the "ss" is the speed and the "pp" is the type (as in SX, DX, DX2, or DX4). The files to update the 486 Python motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_486. The files are PYTHXX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pantera_486/pyth04.exe Replacement battery: Dallas Chip MEMORY Memory Type 512, 1, 2, 4, 16, 32MB x32 or x36 SIMMS Memory Speed 50ns, 60ns, 70ns Configurations 4, 8, 12, 16, 20, 24, ... 128MB Min Capacity 4MB (1SIMM) Max Capacity 128MB SYSTEM CACHE Cache Memry Type 128KB or 512KB DIP Mapping Direct Write Policy Write-back Configurations 0KB, 128KB, 512KB Standard Capacity 0KB Min Capacity 0KB Max Capacity 512KB Size Qty Pkg Volt Speed Notes 128K 1 KIT 5V 15/20ns 512K 1 KIT 5V 15/20ns 32Kx8 2 DIP28 5V 15ns tag ram function 32Kx8 4 DIP28 5V 20ns data ram function 128Kx8 4 DIP32 5V 20ns data ram function .3"width (not .4") *** PENTIUM SYSTEMS *** Cobra Board P/N 010-0042-XX ------ Processors Speeds PENTIUM 60/66/90 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0026-xx Minneapolis, Minnesota, USA CPU= Pentium ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the Pantera 453-0026-xx" line, where the "xx" is in the example. The processor speed will be shown on the "CPU= Pentium ssMhz" line where the "ss" is. The SCSI BIOS is always installed, whether the SCSI chip is on the motherboard or not. If the chip is not on the motherboard, then the SCSI option should be disabled in CMOS. This motherboard used the Adaptec 6360 SCSI chip. Revision 07 of the BIOS and above will not boot correctly if the "ldt 7MP6157 256K Module: or Motorola MCM67A618 512K" is not set correctly in CMOS. If there is a cache module installed in the system, this needs to be enabled, and if there is not a cache module in the system, then this needs to be disabled. The files to update the Pentium Cobra motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_Pentium. The files are cobra-XX.exe, where the "XX" is the revision number. The audio driver used by this motherboard is bizaudio.exe. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/cobra13.exe The audio driver used by this computer is found at: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/bizaudio.exe Replacement battery: Dallas Chip MEMORY Memory Type Pairs of 2MB, 4MB, 8MB, 16MB and 32MB 32 or 36-bit single/double-sided SIMMs, installed in PAIRS Configuration 4, 8, 12, 16, 32, 48, 64, 128 and 192Mb External Cache Direct-map, write-back; 256K standard, upgradable to 512K. Coral Board P/N 010-0046-XX ------ Processors Speeds PENTIUM 90 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0028-xx Minneapolis, Minnesota, USA CPU= Pentium ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the "Pantera 453-0028-xx" line, where the "xx" is in the example. The processor speed will be shown on the "CPU= Pentium ssMhz" line where the "ss" is. If the SCSI chip is not installed on the motherboard, then the SCSI option should be disabled in CMOS. The SCSI BIOS will not install if this process is followed. This motherboard used the AMD SCSI chip. This chip is not user installable. The files to update the Pentium Coral motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_Pentium. The files are coralXX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/coral11.exe Replacement Battery: CR2032 - Soldered MEMORY The system main memory uses from two to six SIMMs in three banks supporting up to 384MB total. The banks are labeled 0A, 0B, 1A, 1B, 2A, 2B identifying each socket of each bank. The following applies when configuring memory: Standard x32 or x36 bit SIMMs may be used. 50ns, 60ns or 70ns SIMMs may be used. 1, 2, 4, 16, 32 or 64MB SIMMs may be used. Both sockets of a bank must be filled when used. Both sockets must be filled with the same capacity SIMM when used. SIMM capacities may be different between banks. Banks should be filled in order starting with bank 0, then bank 1, then bank 2. CACHE The mainboard supports L2 cache commonly referred to as secondary or external cache. L2 cache options are 256KB or 512KB, Burst or Asyncronous. The cache uses 3.3V circuitry. Coral Max or Coral Mn Board P/N 010-0050-XX ------------------------ Processors Speeds PENTIUM 75/90/100 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0030-xx Minneapolis, Minnesota, USA CPU= Pentium ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the Pantera 453-0030-xx" line, where the "xx" is in the example. The processor speed will be shown on the "CPU= Pentium ssMhz" line where the "ss" is. Coral Max and Coral Mn motherboards are identical execpt for the business audio, this feature is not implimented in the Coral Mn board. If the SCSI chip is not installed on the motherboard, then the SCSI option should be disabled in CMOS. The SCSI BIOS will not install if this process is followed. This motherboard used the AMD SCSI chip. This chip is not user installable. The files to update the Pentium Cobra motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_Pentium. The files are cmaxXX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/cmax08.exe The AMD SCSI drivers for this motherboard can be found at: http://www.mei.micron.com/Services/zeosbbs/contamd.htm Replacement Battery: BR2335 - Soldered MEMORY Base The system uses from two to six high speed x36 or x32 based simms. The minimal amount of memory that can be installed is 2MB. Modules must ALWAYS be installed as pairs. The system is capable of using both page, interleaved and page-interleaved memory schemes depending on the amount of system memory installed. Expansion The system is memory is upgradable to 2MB, 4MB, 8MB, 10MB, 12MB, 24MB, 32MB, 64MB, 128MB, 192MB, 256MB and 384MB of memory. Cache The Base system cache is 0K. The cache is upgradable to 256K and 512K of cache via a single industry-standard cache SIMM. The cache controller is integrated into the system chipset. Mapping..................... Direct-mapped Write Policy................ Write-back Configurations.............. 256KB,512KB Standard Capacity........... 0KB Min. Capacity............... 0KB Max Capacity................ 512KB Cache memory type........... Cache SIMM, Synchronous or Asynch. Cache memory Speed.......... 9ns Burst /15ns Async. Cache memory Part number.... IDT7MPV6179/80/81/82 Coral Max 3 or Coral Mn 3 Board P/N 010-0052-XX ------------------------- Processors Speeds PENTIUM 75/90/100/120/133 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0031-xx Minneapolis, Minnesota, USA CPU= Pentium ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the "Pantera 453-0031-xx" line, where the "xx" is in the example. The processor speed will be shown on the "CPU= Pentium ssMhz" line here the "ss" is. Coral Max3 and Coral Mn 3 motherboards are identical execpt for the business audio, this feature is not implimented in the Coral Mn 3 board. If the SCSI chip is not installed on the motherboard, then the SCSI option should be disabled in CMOS. The SCSI BIOS will not install if this process is followed. This motherboard used the AMD SCSI chip. This chip is not user installable. The files to update the Pentium Cobra motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_Pentium. The files are cmax3XX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/cmax303.exe The AMD SCSI drivers for this motherboard can be found at: http://www.mei.micron.com/Services/zeosbbs/contamd.htm Replacement Battery: BR2335 - Soldered MEMORY Base The system uses from two to six high speed x36 or x32 based simms. The minimal amount of memory that can be installed is 2MB. Modules must ALWAYS be installed as pairs. The system is capable of using both page, interleaved and page-interleaved memory schemes depending on the amount of system memory installed. Expansion The system is memory is upgradable to 2MB, 4MB, 8MB, 10MB, 12MB, 24MB, 32MB, 64MB, 128MB, 192MB, 256MB and 384MB of memory. Cache The Base system cache is 0K. The cache is upgradable to 256K and 512K of cache via a single industry-standard cache SIMM. The cache controller is integrated into the system chipset. Mapping..................... Direct-mapped Write Policy................ Write-back Configurations.............. 256KB,512KB Standard Capacity........... 0KB Min. Capacity............... 0KB Max Capacity................ 512KB Cache memory type........... Cache SIMM, Synchronous or Asynch. Cache memory Speed.......... 9ns Burst /15ns Async. Cache memory Part number.... IDT7MPV6179/80/81/82 BOA or BOA MN Board P/N 010-0061-XX -------------- Processors Speeds PENTIUM 75/90/100/120/133 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0033-xx Minneapolis, Minnesota, USA CPU= Pentium ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the "Pantera 453-0033-xx" line, where the "xx" is in the example. The processor speed will be shown on the "CPU= Pentium ssMhz" line where the "ss" is. Boa and Boa Mn motherboards are identical execpt for the business audio, this feature is not implimented in the Boa Mn board. If the SCSI chip is not installed on the motherboard, then the SCSI option should be disabled in CMOS. The SCSI BIOS will not install if this process is followed. This motherboard used the AMD SCSI chip. This chip is not user installable. The files to update the Pentium Cobra motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_Pentium. The files are boa1XX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/boa102.exe The AMD SCSI drivers for this motherboard can be found at: http://www.mei.micron.com/Services/zeosbbs/contamd.htm Replacement battery: BR2335 - Soldered Memory: The system uses from two to six high speed x36 or x32 based simms. The minimal amount of memory that can be installed is 2MB. Modules must ALWAYS be installed as pairs. The system is capable of using both page, interleaved and page-interleaved memory schemes depending on the amount of system memory installed. Cache: You add Level 2 cache memory by adding a 64-bit Single In-line Memory Module (SIMM) into the secondary system Cache Socket on the mainboard. This optional SIMM can be synchronous (9ns) or synchronous (15ns). You must use a 3-Volt SIMM when you add cache memory. If you aren’t sure, contact ZEOS Technical Support before purchasing or installing a cache SIMM. BOA2 Board P/N 010-0066-XX ----- Processors Speeds PENTIUM 75/90/100/120/133 During boot, the system should show the following: PheonixBIOS Version 4.03 Copyright 1985-1994 Phoenix Technologies Ltd., All Rights Reserved Build Time: mm/dd/yy hh:mm:ss Zeos International Ltd. Pantera 453-0036-xx Minneapolis, Minnesota, USA CPU= Pentium ssMhz The build time will vary with each revision of BIOS. The actual revision of the BIOS is the last two numbers at the end of the "Pantera 453-0036-xx" line, where the "xx" is in the example. The processor speed will be shown on the "CPU= Pentium ssMhz" line where the "ss" is. If the SCSI chip is not installed on the motherboard, then the SCSI option should be disabled in CMOS. The SCSI BIOS will not install if this process is followed. This motherboard used the AMD SCSI chip. This chip is not user installable. The files to update the Pentium Cobra motherboard BIOS are located on the Zeos BBS in the Motherboards file area, subarea PCI_Pentium. The files are boa1XX.exe, where the "XX" is the revision number. On the Internet, you can download the latest BIOS at the following URL: http://www.mei.micron.com/ftp/techbbs/zeos/motherboards/pentium/boa205.exe The AMD SCSI drivers for this motherboard can be found at: http://www.mei.micron.com/Services/zeosbbs/contamd.htm Replacement battery: CR2032 - Soldered Memory: You add RAM by inserting Single In-line Memory Modules (SIMMs) into SIMM sockets on the mainboard. Your computer’s mainboard will hold up to six SIMMs of 32-bit DRAM. Slots must be filled in sequence from 0A to 2B. You must have identical pairs of SIMMs in each bank, but different banks can support various capacities and speeds. The mainboard will support up to 384MB of RAM. Note: SIMMs MUST ALWAYS BE INSTALLED IN SEQUENCE FROM BANK 0A TO BANK 2B, AND WITHIN THE SAME BANK, THEY MUST BE THE SAME SPEEDS AND CAPACITIES. Cache: You add Level 2 cache memory by adding a 64-bit Single In-line Memory Module (SIMM) into the secondary system Cache Socket on the mainboard. This optional SIMM has an access time of 7 nanoseconds. You must use a 3-Volt SIMM when you add cache memory. If you aren’t sure, contact ZEOS Technical Support before purchasing or installing a cache SIMM.