|
PCNTN3-9 IO base address is already in use by another PCNET device.
Explanation: The specified IO address number is already in use by
another device.
Action: Modify the IO address setting on the hardware or modify
the IO Address setting in the setup dialog box.
PCNTN3-13 IRQ and/or DMA number is already in use by
another device.
Explanation: The specified IRQ is specified by
another device.
Action: Modify the IRQ setting
in the setup dialog box.
PCNTN3-18 PCI scan specified, device not found.
Explanation: The driver cannot locate the
Ethernet controller on the PCI bus.
Action: Perform the following steps
PCNTN3-19 LanceOpenAdapter failed.
Explanation: The configuration is set up incorrectly.
Action: Rerun the setup program.
PCNTN3-20 Device at specified IO base address not found.
Explanation: The Ethernet controller
cannot be found at the specified IO address.
Action: Verify that the IO address matches with the board. Otherwise,
remove the IO Address specification from the setup.
PCNTN3-21 Device not found.
Explanation: The
driver cannot find any PCnet device.
Action: Perform the following steps
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.