Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Data Scrubbing



Data Scrubbing

Data Scrubbing Another way to force discovery and correction of sector media errors is data scrubbing .

Array synchronization  reads the data and parity blocks from all the disks and checks that the parity correctly matches the data block information. If the logical drive was synchronized upon configuration, the parity information matches the data. The synchronization procedure is, therefore, used for data scrubbing. The advantage to this procedure, when used in addition to tape backups, is that data scrubbing examines unallocated sectors of the drive, in addition to those that have been allocated, that is, data areas protected by a tape backup. If any sector media errors are found during this process, they are corrected at the disk level using disk ECC information, if possible, or at the array level using RAID parity information, if necessary.

Automatic Data Scrubbing and Data Scrubbing Utilities: ServeRAID II, 3H, and 3L Adapters allow RAID-5 and RAID-1 logical drives to be data scrubbed in the background via firmware. This feature is available using the following firmware levels available from:

http://www.us.pc.ibm.com/files.html

Note: You do not need to synchronize RAID level-0 or 1 logical drives before storing data.

Data scrubbing continuously reads all sectors of RAID-1 and RAID-5 logical drives in the background while the system is running. If a defective sector is found, it is automatically repaired. As a result of this feature, you no longer have to synchronize RAID level-1 and RAID level-5 logical drives on a weekly basis.

You must synchronize all RAID level-5 logical drives before storing data.

The IBM PC ServeRAID Adapter allows RAID-5 and RAID-1 logical drives to be data scrubbed via the synchronization utility by taking the server offline and running the IBM ServeRAID Configuration Diskette. Array synchronization may take several hours, depending on the size of the logical drive. The ServeRAID adapter provides various utilities to provide the customer with data scrubbing flexibility.

The table below shows the utilities available for the IBM PC ServeRAID Adapter in specific operating system environments. With the exception of Netfinity Manager, the utilities below can be downloaded from

http://www.us.pc.ibm.com/files.html

The section following the table discusses the benefits of the utilities and how to obtain, install and use them.

Windows NT Netware OS/2 SCO
Netfinity Manager 5 and above IBM ServeRAID Configuration
Diskette
IPSSEND
ServeRAID Administration and Monitoring Utility
Netfinity Manager 5 and above IBM ServeRAID Configuration
Diskette
IPSSEND
ServeRAID Administration and Monitoring Utility
Netfinity Manager 5 and above IBM ServeRAID Configuration Diskette
IPSSEND
ServeRAID Administration and Monitoring Utility
IBM ServeRAID Configuration Diskette
IPSSEND
ServeRAID
Administration and Monitoring Utility


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.