Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Updating the Windows NT Driver



Updating the Windows NT Driver

Perform the following steps if a Windows NT driver is already installed and you want to install an updated version of the driver.
  1.  Open a DOS command prompt window.
  2.  Change the current directory to the Windows NT driver directory, for example:

      CD \WINNT\SYSTEM32\DRIVERS

  3.  Make a backup copy of the old driver. You can copy the file into the same directory with  a .SAV extension indicating that it is the saved file, for example:

      COPY QL2100.SYS QL2100.SAV

  4.  Insert the Netfinity Fibre Channel DOS Device Drivers diskette into your diskette drive.
  5.  Copy the new driver over the old driver, for example:

      COPY A:\NT\QL2100.SYS

  6.  Remove the Netfinity Fibre Channel DOS Device Drivers diskette.
  7.  Restart your system to load the driver.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.