Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Updating the System BIOS



Updating the System BIOS

Complete this procedure to update the system BIOS.
  1.  Insert the IBM Netfinity 5500 M20 BIOS Update  Diskette  in the diskette drive.
  2.  Press Ctrl+Alt+Del to restart the server. The system  begins the power-on self-test (POST).
  3.  Select 1 - Update POST/BIOS from the menu that  contains various flash (update) options.
  4.  Select Y when you are asked if you would like to  move the current POST/BIOS image to the backup ROM location.

      Important:
     The backup image of the current POST/BIOS is helpful with troubleshooting  the upgrade, if troubleshooting becomes necessary.

  5.  Select N when you are asked if you would like to  save the current code to a diskette.
  6.  You will be asked to choose which language you wish  to use. Select your language (0-7) and press Enter to accept your choice.
  7.  Press Enter to start the update process.
  8.  Press Enter to confirm that you want to update the  system BIOS. When the update process completes,  you will be prompted to remove the diskette and  press Enter to restart the system.
  9.  Remove the diskette and go to Removing the Shuttle and Processor Housing.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.