![]() |
==View or Print jumper settings using Fixedsys or New Courier fonts== SA486P AIO PCI Motherboard - BIOS ID string ??????????????? Please send yours in - 4-72 pin SIMM slots (1-128meg FPM DRAM) - 3-32bit PCI slots - 4-16bit ISA slots - 128/256KB CACHE support in 8-28pin sockets + 1 TAG RAM socket - Phoenix Auto-Detect - Intel chipset - CPU socket which supports these processors: INTEL 80486SX/80487SX/80486DX/80486DX2/Pentium Overdrive - Supports speeds of 25/33/40/50/66 MHz. - SCSI drive interface - PCI Bus master IDE interface for upto 4 IDE devices. - Multi-I/O chip supports 2 - 16550 Fast UART serial ports 1 - parallel port with EPP + ECP, 1 - floppy disk interface. - Manufactured by: ELITEGROUP COMPUTER SYSTEMS, INC. ----------------------------------------------------------------------------- CONNECTIONS ----------------------------------------------------------------------------- Purpose Location Purpose Location ----------------------------------------------------------------------------- Reset switch J1 Parallel port J8 Speaker J2 Serial port 2 J10 Power LED + keylock J3 Serial port 1 J11 SCSI drive interface J4 32-bit PCI Local bus slot S1 IDE HDD interface J5 32-bit PCI Local bus slot S2 Floppy drive interface J6 32-bit PCI Local bus slot S3 ----------------------------------------------------------------------------- USER CONFIGURABLE SETTINGS ----------------------------------------------------------------------------- Function Jumper Position ----------------------------------------------------------------------------- *Parallel port IRQ7 JP13 pins 2 + 3 closed Parallel port IRQ5 JP13 pins 1 + 2 closed *Flash BIOS write protect enabled JP19 pins 1 + 2 closed Flash BIOS write protect disabled JP19 pins 2 + 3 closed *Factory configured - do not alter JP26 N/A *ODP586SX write back mode enabled JP27 Closed ODP586SX write back mode disabled JP27 Open *Factory configured - do not alter JP28 pins 2 + 3 closed *Factory configured - do not alter JP29 Closed *On board SCSI termination enabled JP34 Closed On board SCSI termination disabled JP34 Open *Factory configured - do not alter JP42 Closed *Factory configured - do not alter JP43 N/A *Factory configured - do not alter JP44 N/A *Factory configured - do not alter JP45 N/A *Factory configured - do not alter JP46 N/A *Factory configured - do not alter JP47 N/A *Factory configured - do not alter JP48 pins 2 + 3 closed * denotes default - please send in the N/A data thanks ----------------------------------------------------------------------------- CACHE CONFIGURATION ----------------------------------------------------------------------------- Size Max Cachable Bank 0 Bank 1 TAG ----------------------------------------------------------------------------- 128KB 16MB (4) 32K x 8 NONE (1) 16K x 4 256KB 32MB (4) 32K x 8 (4) 32K x 8 (1) 16K x 4 ----------------------------------------------------------------------------- CACHE JUMPER CONFIGURATION ----------------------------------------------------------------------------- Size JP4 JP5 JP6 JP7 JP9 JP10 JP21 JP22 ----------------------------------------------------------------------------- 128KB 2 + 3 1 + 2 1 + 2 2 + 3 2 + 3 2 + 3 Open Open 256KB 1 + 2 2 + 3 1 + 2 2 + 3 2 + 3 2 + 3 Closed Closed Note: Pins designated should be in the closed position. ----------------------------------------------------------------------------- CPU TYPE CONFIGURATION ----------------------------------------------------------------------------- CPU Socket JP23 JP24 JP25 JP51 ----------------------------------------------------------------------------- 80486SX PGA 2 + 3 Closed 2 + 3 Closed 80486SX PQFP N/A Open 2 + 3 Closed 80487SX PGA 1 + 2 Closed 1 + 2,3 + 4 Closed 80486DX PGA 3 + 4 Closed 1 + 2,3 + 4 Closed 80486DX2 PGA 3 + 4 Closed 1 + 2,3 + 4 Closed Pentium OD PGA 1 + 2 Closed 1 + 2,3 + 4 Open ----------------------------------------------------------------------------- CPU SPEED CONFIGURATION ----------------------------------------------------------------------------- Speed JP1 JP2 JP3 JP17 JP18 ----------------------------------------------------------------------------- 25MHz Closed Open Closed 2 + 3 2 + 3 33MHz Open Open Closed 2 + 3 1 + 2 50i MHz Closed Open Closed 2 + 3 2 + 3 66i MHz Open Open Closed 2 + 3 1 + 2 ----------------------------------------------------------------------------- PCI BUS INTERRUPT SELECT ----------------------------------------------------------------------------- Setting JP14 JP15 JP16 ----------------------------------------------------------------------------- * IRQ 15 1 + 2 1 + 2 1 + 2 IRQ 10 1 + 2 1 + 2 1 + 2 IRQ 11 1 + 2 1 + 2 1 + 2 None 1 + 2 1 + 2 1 + 2 Note: IRQ14 is hardwired for IDE interface. If using an interrupt that cannot be shared with other devices, JP14, JP3 closed. ----------------------------------------------------------------------------- EPP/EPC CONFIGURATION ----------------------------------------------------------------------------- Type JP11 JP12 ----------------------------------------------------------------------------- DRQ1/DACK1 pins 1 + 2 closed pins 1 + 2 closed DRQ3/DACK3 pins 2 + 3 closed pins 2 + 3 closed ----------------------------------------------------------------------------- DRAM CONFIGURATION ----------------------------------------------------------------------------- Size Bank 0 Bank 1 Bank 2 Bank 3 ----------------------------------------------------------------------------- 2MB (1) 256K x 36 (1) 256K x 36 NONE NONE 4MB (1) 256K x 36 (1) 256K x 36(1) 256K x 36 (1) 256K x 36 6MB (1) 512K x 36 (1) 512K x 36 NONE NONE 4MB (1) 256K x 36 (1) 256K x 36 (1) 512K x 36 (1) 512K x 36 6MB (1) 512K x 36 (1) 512K x 36(1) 256K x 36 (1) 256K x 36 8MB (1) 512K x 36 (1) 512K x 36(1) 512K x 36 (1) 512K x 36 8MB (1) 1M x 36 (1) 1M x 36 NONE NONE 10MB (1) 256K x 36 (1) 256K x 36 (1) 1M x 36 (1) 1M x 36 10MB (1) 1M x 36 (1) 1M x 36 (1) 256K x 36 (1) 256K x 36 12MB (1) 512K x 36 (1) 512K x 36 (1) 1M x 36 (1) 1M x 36 12MB (1) 1M x 36 (1) 1M x 36 (1) 512K x 36 (1) 512K x 36 16MB (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 16MB (1) 2M x 36 (1) 2M x 36 NONE NONE 18MB (1) 256K x 36 (1) 256K x 36 (1) 2M x 36 (1) 2M x 36 18MB (1) 2M x 36 (1) 2M x 36 (1) 256K x 36 (1) 256K x 36 20MB (1) 512K x 36 (1) 512K x 36 (1) 2M x 36 (1) 2M x 36 20MB (1) 2M x 36 (1) 2M x 36 (1) 512K x 36 (1) 512K x 36 ----------------------------------------------------------------------------- DRAM CONFIGURATION (CONT.) ----------------------------------------------------------------------------- Size Bank 0 Bank 1 Bank 2 Bank 3 ----------------------------------------------------------------------------- 24MB (1) 1M x 36 (1) 1M x 36 (1) 2M x 36 (1) 2M x 36 24MB (1) 2M x 36 (1) 2M x 36 (1) 1M x 36 (1) 1M x 36 32MB (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 32MB (1) 4M x 36 (1) 4M x 36 NONE NONE 34MB (1) 256K x 36 (1) 256K x 36 (1) 4M x 36 (1) 4M x 36 34MB (1) 4M x 36 (1) 4M x 36 (1) 256K x 36 (1) 256K x 36 36MB (1) 512K x 36 (1) 512K x 36 (1) 4M x 36 (1) 4M x 36 36MB (1) 4M x 36 (1) 4M x 36 (1) 512K x 36 (1) 512K x 36 40MB (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 40MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 48MB (1) 2M x 36 (1) 2M x 36 (1) 4M x 36 (1) 4M x 36 48MB (1) 4M x 36 (1) 4M x 36 (1) 2M x 36 (1) 2M x 36 64MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 64MB (1) 4M x 36 (1) 4M x 36 NONE NONE 66MB (1) 256K x 36 (1) 256K x 36 (1) 8M x 36 (1) 8M x 36 66MB (1) 8M x 36 (1) 8M x 36 (1) 256K x 36 (1) 256K x 36 68MB (1) 512K x 36 (1) 512K x 36 (1) 8M x 36 (1) 8M x 36 68MB (1) 8M x 36 (1) 8M x 36 (1) 512K x 36 (1) 512K x 36 72MB (1) 1M x 36 (1) 1M x 36 (1) 8M x 36 (1) 8M x 36 72MB (1) 8M x 36 (1) 8M x 36 (1) 1M x 36 (1) 1M x 36 80MB (1) 2M x 36 (1) 2M x 36 (1) 8M x 36 (1) 8M x 36 80MB (1) 8M x 36 (1) 8M x 36 (1) 2M x 36 (1) 2M x 36 96MB (1) 4M x 36 (1) 4M x 36 (1) 8M x 36 (1) 8M x 36 96MB (1) 8M x 36 (1) 8M x 36 (1) 4M x 36 (1) 4M x 36 128MB (1) 8M x 36 (1) 8M x 36 (1) 8M x 36 (1) 8M x 36 ===========================END OF DATA ON SA486P============================= |